Something funny is in the air . . .
l Actual Flying Badminton
Shuttlecock
l Featherweight Recovery
l Easy to build, fun to fly!
l All Birdie kits are now in the
classic Red and White
l Great for small fields, low drift
recovery!
l A Best-Selling Odd'l Rockets kit!

This is a SKILL LEVEL TWO kit,
because Epoxy is used in
construction.
l 3" Styrofoam Ball is Pre-
Drilled for motor mount, central
launch lug and Antenna Fins
l Featherweight Recovery
l Easy to build, easy to fly!
l Great for small fields, low drift
recovery!

This is a
SKILL LEVEL ONE kit.







Requires white glue, pencil, and
ruler to build.
l Design based on the out-of-
of-production "Wiggler" rocket, but
improved!
Great small field flyer -
low drift!
l Long Balsa Nose Cone, Laser
Cut Balsa Fins
l Kevlar* tether used throughout
out rocket body.
l Simply "Socket" the rocket
segments together, install an
engine and fly!

This is a
SKILL LEVEL TWO kit.

Requires white glue, Super glue
(CA) pencil, ruler, hobby knife,
sandpaper, balsa filler and paint to
build.
Odd'l Rockets products are available exclusively from
www.JonRocket.com
Visit my Model Rocket Building Websites at:
www.modelrocketbuilding.blogspot.com
www.howtobuildmodelrockets.20m.com
THE NEWEST KITS!
* Kevlar is a registered trademark of the Dupont Company.
l Truly Unique! A Tube
Stabilized Rocket -
with a Twist!
l The PIPELINE combines tube
and spin stability in one rocket!

l The tube fins are slightly
canted. The airstream flows thru
the canted tubes making the
PIPELINE spin!
l Recovery by 12" parachute.
l Includes Water Slide Decals
Click on a triangle to download and print
your choice of decor:
BRICK WALL
CHRISTMAS TREE
NAR Logo
Flying Tetrahedron!
C6-3 engine powered
Weird Smoke Trail
Rear eject - Streamer and
tumble recovery
Build it - Watch it fly - and Wonder
and Wonder why!
Then go home.

NAR logo used
by permission.
BLANK Skin
The POINT!
Requires white glue, Super glue
(CA) pencil, ruler, hobby knife,
sandpaper, balsa filler and paint
for construction
l Nose Cone is Half the Rocket!
l Laser Cut Fins, LARGE
Plastic Nose Cone
l Streamer Recovery
l Great for small fields, low drift
recovery.
l A Best-Selling Odd'l Rockets
kit!

This is a SKILL LEVEL TWO kit











Requires white glue, Super glue
(CA) pencil, ruler, hobby knife,
sandpaper, balsa filler and paint
for construction.
SPECIFICATIONS:
Height 8 1/2"
Body Span 4 7/8"
Empty Weight 1.70 oz.
l When the ejection charge goes off, The Cyclone
breaks into two parts.
The upper Monocopter spins down like a Mapleseed!
The lower (two fin) half Helicopters down.
l You can hear it whistle on the way up!
l Quality parts, laser cut fins and great instructions
round out this new classic!
This Odd'l Rocket uses lighter
weight BT tubing for optimum performance.

You'll be amazed how well this "no moving parts"
helicopter recovery rocket performs!
While the picture above shows a fully painted Cyclone, It is
recommended to keep it light! Heavy coats of paint will affect the
helicopter performance.

The Cyclone was designed by Jonathan Wayne Mills,
PhD

Requires white glue, pencil, ruler, hobby knife,
sandpaper, Optional balsa filler and paint to build.

Get ready for some NEW Odd-Roc fun!

l The UP! Cup gets great altitude for an Odd-Roc.
l The Cup actually amplifies the engine thrust and
makes a strange smoke trail.
l The engine ejects on a streamer while the cup falls
slowly or "Aero-Brakes" safely to the ground for another
flight.




Pre-cut self-adhesive vinyl now included in the UP! Cup kit!
Felt tip pens or stickers can also be used for decoration.

Requires a hobby knife, white glue, epoxy glue, rubber
cement, pencil and a ruler for construction.
Requires white glue, pencil, ruler,
hobby knife, sandpaper, balsa
filler and paint for construction.
Requires white glue,
15 minute Epoxy, pencil
and ruler to build.